• Your shopping cart is empty!

  • GT POWER High Power 3W Flight Simulated And Flashing Light System RC Plane GT027

GT POWER High Power 3W Flight Simulated And Flashing Light System RC Plane GT027

  • Brands GT Power
  • Product Code: GT027
  • Availability: In Stock

  • US$21.00


 

Product Information
 
Package Content:   RC High Power 3W Flight Simulated And Flashing Light System   x 1
 
Feature :
It's designed according to the standard of aircraft lights which makes your aircraft more realistic and shine
Eight light group interfaces, red anti-collision lights. while flashing lights, navigation lights (left side is red, right side is green), landing lights
Eight operating modes, which can be connected to any switched channel on remote control for mode conversion
Low voltage detection function: when the battery volyage id=s lower than 6.8V, all light flashing 
After connecting the wires, enter the operating modes. Through the control of transmitter switch can enter into the 8 operating modes .
 
Specification:
1.Input voltage:power supplied by 2S lithium battery.
2.working current:1200mA
3.LED wire length；80cm
4.Power connection wire length:30 cm
5.Swich wire length:25cm
6.Signal wire length:30cm
7.Dimension:55x52mm
8.Weight:100g
 
Package Contents: 
  1. 5mm white light x 5 pieces
  2. 5mm green light x 1 piece
  3. 5mm red light x 2 pieces
  4. Control box x 1
  5. 3M sticker
  6. Accessories bag 
  7. Operating manual 

How to install】

1. First of all check accessories to make sure all the parts are included.
2. Use the connect wire to switch the channel of remote control.
3. Connect each light wire to the corresponding socket in control box according to the
requirements of control.
4. Stick main control box on the suitable position of the aircraft.
5. Make all the light wires fixed to avoid the interference between light wires and other parts of the aircraft.
6. Fix all the wires and check whether they are set correctly.

【Product mode】
After connecting the wires，enter the operating modes. Through the control of remote control switch can enter into the 8 operating modes.

Mode 1: Civil aviation standards; the left red light and the right green light are always on, the flashing lights are flashing in highest speed，the beacon light is flashing in highest speed at a certain frequency，the landing lights are off or on circularly.
Mode 2: Civil aviation standards; the left red light , the right green light and the flashing lights are flashing in highest speed at a certain frequency，the beacon light is flashing in highest speed at a
certain frequency，the landing lights are off or on circularly.
Mode 3 and Mode 4：Flash alternately; left side flash two times, right side flash two times, changing differently.
Mode 5: The left red light, the right green light and the flashing lights are always on, the beacon light is flashing in highest speed at a certain frequency，the landing lights are off or on circularly.
Mode 6: Emergency forced landing light flashing mode; all the lights are quickly flashing in highest speed at a certain frequency.
Mode 7: Normal cruise flashing, with all the lights flash slowly. 
Mode 8: All the lights are on.
Mode 9: All the lights are off.