Tarot 7-inch 295mm Carbon Fiber 4-Axis Quadcopter MARK4-7 Racing Drone Frame Kit - TL1600

Product Description:
· New Tarot 7 Inch FPV Racing Drone;
· Made of high quality 3K twill carbon fiber board, strong and durable;
· Exquisite appearance design, it is the preferred rack for FPV racing drone;
· Together with the recommended settings, you can achieve idling resistance of up to 35 minutes.

Product Features:
1. H-frame structure design, shorten arm length, reduce weight and increase arm strength;
2. Large center plate mounting space, bottom arm mounting option, you can get more installation space;
3. Standard front FPV lens mounting position size fit 19mm*19mm;
4. Half of the flight controller and ESC mounting position and the rear of the transmission mounting position reserved for 30.5mm*30.5mm and 20mm*20mm mounting holes, providing more options;
5. Standard with vibration damping silicone, which can reduce the vibration pressure on the flight control to a greater extent, to achieve smooth flight.

Product parameters:
Frame type: H type
Maximum accessories supported: 7 inches
Wheelbase: 295mm
Dimension: 193mm*223mm
Weight: 121G
Bottom plate thickness: 2.5mm
Top plate thickness:
2.5mm arm: 5mm
Camera mounting pitch: 19mm
Transmission installation hole distance: compatible with 30.5mm/20mm
Flight control installation hole distance: compatible with 30.5mm/20mm
Flight control: RF/ KISS/F3/F4/F7

Product specifications / Includes :
Upper frame plate (2.5mm) × 1
Lower frame plate (2.5mm) × 1
Arm (5mm) × 4
FPV lens fixed side plate (2.5mm) × 2
Front protection frame plate (2mm) × 1
Rear protection frame plate (2mm) × 1
Arm clamp (2mm) × 2
Battery anti-slip pad × 1
Mesh aluminum column M3 * 25 × 4
Mesh aluminum column M3 * 18 × 4
Controller Flight and ESC damping silicone × 8
Transmission damping silicone × 4
Shock-absorbing sponge holder × 4
Battery Velcro strap × 1
Nylon cable ties × 10
Heat shrink tube × 1
Half-round head screws (M3 * 20mm) × 4
Half-round head screws (M3 * 14mm) × 4
Half-round head screws (M3 * 12mm) × 8
Half-round head screws (M2 * 4mm) × 2
Flat head screws (M3 * 10mm) × 4
Flat head screws (M3 * 8mm) × 8
Metal nut M3 × 4
Nylon nut M3 × 8